Identifying original finishes

Discuss everything about Honda GoldWing. Feel free to ask any question related to GoldWing.

Moderators: CYBORG, Oldewing, robin1731, Forum Moderators

Post Reply
Old Sparky
Lead Member
Lead Member
Posts: 7
Joined: Mon Mar 13, 2017 12:35 pm

Identifying original finishes

#1

Post by Old Sparky »

I have tried to search for answers with no success so I would like to ask if anyone can give me some insights. Trying to figure out what was originally used on master cylinders and calipers. Master cylinders appear to be anodized black? Calipers painted? I have a nice 76 that I am trying to bring back and it has been a lot of fun hours in the garage, cannot wait for spring ! Thanks for any information.
User avatar
Whiskerfish
President
President
Posts: 36852
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Re: Identifying original finishes

#2

Post by Whiskerfish »

Pretty sure you are correct but I would wait for confirmation from one of the guys into restoration.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!
User avatar
wog
Platinum Member
Platinum Member
Posts: 1766
Joined: Fri Sep 16, 2011 9:08 am
Location: FL

Re: Identifying original finishes

#3

Post by wog »

I think you're correct. Just don't forget the painted red dot (10mm diameter) on both the calipers and master.
Great to keep these old 'Wings flying on down the road.
Old Sparky
Lead Member
Lead Member
Posts: 7
Joined: Mon Mar 13, 2017 12:35 pm

Re: Identifying original finishes

#4

Post by Old Sparky »

Thanks, I got some good pictures of the red dots.
User avatar
Dog Boy
Gold Member
Gold Member
Posts: 1449
Joined: Thu Jun 12, 2008 1:49 pm
Location: Wilmington, Illinois

Re: Identifying original finishes

#5

Post by Dog Boy »

When I worked over the calipers for the "Team 993" bike, I saved the original red dot by using Vaseline to coat them during stripping and repainting.
Worked pretty well...

AL
They call me "Dog Boy"

Can't blame the "PO"
Original owner 76 LTD
Team 993
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “GoldWing Tech Discussions”