Now I'm curious... being that the speedo gearbox is on opposite sides, couldn't one simply reverse the wheel? Are the gearboxes similar enough that it would work (aside from the brake/rotor issues)?rcmatt007 wrote:the simple answer is no. the caliper mounts are different and the speedos are on opposite sides
Front wheel help
Moderators: CYBORG, Oldewing, robin1731, Forum Moderators
- Track T 2411
- Honored Life Member
- Posts: 8522
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Front wheel help
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- BlueThunder
- Platinum Member
- Posts: 1614
- Joined: Fri Nov 07, 2008 4:39 pm
- Location: Sarasota, Florida
Re: Front wheel help
No, the cable would spin in the opposite direction. The meter only registers in one. Kind of like driving a car backwards does not turn the odometer (reduce mileage).Track T 2411 wrote: Now I'm curious... being that the speedo gearbox is on opposite sides, couldn't one simply reverse the wheel? Are the gearboxes similar enough that it would work (aside from the brake/rotor issues)?
...Brian
2014 CTX1300 Deluxe - BlackThunder aka Predator
1977 GL1000 - Ox
2014 CTX1300 Deluxe - BlackThunder aka Predator
1977 GL1000 - Ox
- robin1731
- Membership Admin
- Posts: 21730
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: Front wheel help
Think about that for a second. Where would the speedo drive face?Track T 2411 wrote:snip............... couldn't one simply reverse the wheel?
.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- Track T 2411
- Honored Life Member
- Posts: 8522
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Front wheel help
I guess I didn't post my question clearly... is the interface between the wheel hub and the gearbox the same or similar enough between the two styles that one could keep the 78 forks, gearbox, etc, and use a 77 spoked wheel by reversing it, which would keep the 78 gearbox on the original side? I don't have both handy to compare at the moment.
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- Whiskerfish
- President
- Posts: 36949
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Front wheel help
The drive hook up to the cable would either be pointed the wrong direction (as in forward) or it would be on top of the axle not the bottom. Plus there is a stop lug on the lower fork tube that keeps it from rotating that would be an issue.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
- Old Fogey
- Honored Life Member
- Posts: 7704
- Joined: Mon Aug 27, 2007 11:31 pm
- Location: Glasgow, Scotland
- Contact:
Re: Front wheel help
Any spoked front wheel from GL1000, CB750, CB550, CB500 up to 77 will fit and take the rotors you have.
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
-
- Silver Member
- Posts: 659
- Joined: Fri May 26, 2017 11:07 am
Re: Front wheel help
It appears that the drive boxes are different diameters between spoked wheels and Comstars and don't fit the recess on the wheel properly. So it doesn't look like you could use an early drive on a reversed late wheel.
- Track T 2411
- Honored Life Member
- Posts: 8522
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Front wheel help
Thank you for that clear answer to my obviously 'muddy' question, lol! I somehow couldn't come up with "Will an early drive box fit a later wheel?"Shadowjack wrote:It appears that the drive boxes are different diameters between spoked wheels and Comstars and don't fit the recess on the wheel properly. So it doesn't look like you could use an early drive on a reversed late wheel.
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- Old Fogey
- Honored Life Member
- Posts: 7704
- Joined: Mon Aug 27, 2007 11:31 pm
- Location: Glasgow, Scotland
- Contact:
Re: Front wheel help
This may help those who want to do the spoke swap (not quite finished yet)
http://www.wingovations.com/spokes-coms ... 4594147858
http://www.wingovations.com/spokes-coms ... 4594147858
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
-
- Zinc Member
- Posts: 43
- Joined: Tue Nov 07, 2017 6:10 pm
Re: Front wheel help
Sorry for bringing up an old thread but to start a mock up would this wheel do?
https://rover.ebay.com/rover/0/0/0?mpre ... 2210575566
Again its the lester wheel on mine atm this wheel interests me as it comes with discs. Thanks
https://rover.ebay.com/rover/0/0/0?mpre ... 2210575566
Again its the lester wheel on mine atm this wheel interests me as it comes with discs. Thanks
77 Gl1000
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 650 Views
-
Last post by ericheath
-
- 4 Replies
- 271 Views
-
Last post by enrique dauner
-
- 7 Replies
- 600 Views
-
Last post by Fred Camper