another thread size question
Moderators: CYBORG, Oldewing, robin1731, Forum Moderators
- 5speed
- Honored Life Member
- Posts: 5312
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
another thread size question
does anyone know the thread size for the rear upper shock mounts on a 76?
My 10mm 1.50 tap won't work.
I checked the thread pitch with my gauge and it is telling me 1.25. the only die I have with a 1.25 pitch is a 9mm and it's to small.
I even tried a 3/8 course and fine and no go.
I need to make a spacer and was hoping to cut threads in it he same as the shock mount.
My 10mm 1.50 tap won't work.
I checked the thread pitch with my gauge and it is telling me 1.25. the only die I have with a 1.25 pitch is a 9mm and it's to small.
I even tried a 3/8 course and fine and no go.
I need to make a spacer and was hoping to cut threads in it he same as the shock mount.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: another thread size question
sounds to me like it is 10mm x 1.25
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- 5speed
- Honored Life Member
- Posts: 5312
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: another thread size question
I sort of came to that conclusion but my tap and die set I thought was pretty complete and I don't have a 10mm x 1.25.CYBORG wrote:sounds to me like it is 10mm x 1.25
I've pretty much convinced myself to re cut the shock mount threads to 3/8 course to match the "spacer" I have but thought I would check in case the threads were buggered up on the stud.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: another thread size question
I think either solution will , but if it were me I would get the right tap. Its the right thing to do, and might prevent you from becoming "the previous owner" we hear so much about
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
-
- Titanium Member
- Posts: 369
- Joined: Fri Jul 28, 2017 5:30 pm
- Location: South Carolina
Re: another thread size question
I just got thru with the same problem. I bought mirrors for the Wang. I could not find a 10m x1.0 so my solution is Locktite thread replace. Pour it in the hole screw the bolt in, wipe off excess, wait 5 minutes. remove bolt. wala, 9m 1.5.
1977 Gl 1000
1976 F1 750 SS
1973 Ironhead chopper
2007 Road King
1974 dohc 450 chopper project
1976 Gl 1000 parts bike
600rr parts bike
1976 F1 750 SS
1973 Ironhead chopper
2007 Road King
1974 dohc 450 chopper project
1976 Gl 1000 parts bike
600rr parts bike
- 5speed
- Honored Life Member
- Posts: 5312
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: another thread size question
you make a valid point!CYBORG wrote:I think either solution will , but if it were me I would get the right tap. Its the right thing to do, and might prevent you from becoming "the previous owner" we hear so much about
10x1.25 tap ordered. Don't want to be "that guy".
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: another thread size question
good call
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- 5speed
- Honored Life Member
- Posts: 5312
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: another thread size question
This is going to be my spacer.
I will cut it to length, re thread it and it will go between the shock end and the bracket for the saddle bags.
I will cut it to length, re thread it and it will go between the shock end and the bracket for the saddle bags.
- Attachments
-
- 56110106_lg.jpg (5.69 KiB) Viewed 188 times
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: another thread size question
looks like a good plan. can it be polished?
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- 5speed
- Honored Life Member
- Posts: 5312
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: another thread size question
yes.. although I think I'm going to go with either black lacquer paint or powder coat. The saddle bag frame will be black plus I'm not a big fan of shiny things. lolCYBORG wrote:looks like a good plan. can it be polished?
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- Graham Cracker
- Gold Member
- Posts: 1133
- Joined: Tue Nov 13, 2007 10:24 pm
- Location: Bradford, PA
Re: another thread size question
Doesn't everybody like shiny?5speed wrote:yes.. although I think I'm going to go with either black lacquer paint or powder coat. The saddle bag frame will be black plus I'm not a big fan of shiny things. lolCYBORG wrote:looks like a good plan. can it be polished?
Mark
1975 GL 1000 Candy Antares Red
1976 GL 1000 Sulfur Yellow
1977 GL 1000 Pearl White
1978 GL 1000 Candy Limited Maroon
1975 GL 1000 Candy Antares Red
1976 GL 1000 Sulfur Yellow
1977 GL 1000 Pearl White
1978 GL 1000 Candy Limited Maroon
- Track T 2411
- Honored Life Member
- Posts: 8482
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: another thread size question
And yes, there's a GoldWing under there somewhere!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- 5speed
- Honored Life Member
- Posts: 5312
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: another thread size question
I bet he completed at Lake George..Graham Cracker wrote:Doesn't everybody like shiny?5speed wrote:yes.. although I think I'm going to go with either black lacquer paint or powder coat. The saddle bag frame will be black plus I'm not a big fan of shiny things. lolCYBORG wrote:looks like a good plan. can it be polished?
TooManyLights.jpg
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- salukispeed
- Platinum Member
- Posts: 1951
- Joined: Sun Feb 21, 2010 10:08 am
- Location: Oak Forest Illinois US
Re: another thread size question
Just my opinion here and there is always specific concerns or needs but if the machine is metric try to keep it metric and if it is inch then keep it inch whenever possible will minimize confusion and problems down the road.
Honda 72 CL100 sold
74 CB750 K4 nice driver
1966 CA77/305 Dream nostalgic driver
84 GL1200I work in progress
1970 CT 70
1982 GL500 Interstate
74 CB750 K4 nice driver
1966 CA77/305 Dream nostalgic driver
84 GL1200I work in progress
1970 CT 70
1982 GL500 Interstate
- 5speed
- Honored Life Member
- Posts: 5312
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: another thread size question
I do attempt to do that..but when I didn't have a 10mm x 1.25 die I began wondering if the stud was another Japanese only thing like their screws...lolsalukispeed wrote:Just my opinion here and there is always specific concerns or needs but if the machine is metric try to keep it metric and if it is inch then keep it inch whenever possible will minimize confusion and problems down the road.
I have a tap on the way so I can recut the threads in the nut.
And I was successful in my hunt for 5/8 well nuts for the saddle bags.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 159 Views
-
Last post by odyssey
-
- 1 Replies
- 154 Views
-
Last post by Wangthang
-
- 0 Replies
- 173 Views
-
Last post by Crazzy450z
-
- 21 Replies
- 953 Views
-
Last post by Sidecar Bob
-
- 7 Replies
- 413 Views
-
Last post by Wangthang