Aluminum Radiator?
Moderators: CYBORG, Oldewing, robin1731, Forum Moderators
- childintime65
- Brass Member
- Posts: 22
- Joined: Thu Jul 16, 2009 12:16 am
- Location: Ohio
Aluminum Radiator?
Has anyone tried an aluminum radiator like this ? http://www.ebay.com/itm/Aluminum-radiat ... 9n&vxp=mtr
I'd really like to use this, if it fits and works well.
I'd really like to use this, if it fits and works well.
1976 GL1000
1977 GL1000
1980 GL1100
1977 GL1000
1980 GL1100
- Whiskerfish
- President
- Posts: 36853
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Aluminum Radiator?
It would take some fabrication I think. The bracket for the fan is welded to the old one so that would have to be figured out. The overflow drain looks to me to be pointing in the wrong direction?
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
- Toehead
- True Blue Steel Biker
- Posts: 2139
- Joined: Fri Jul 15, 2011 3:10 pm
- Location: Mendon, MA
Re: Aluminum Radiator?
Whisker, I think I am missing something..
It looks to me that all the mounting requirements for the fan are on that aluminum radiator. On my bike the fan bracket screws into bosses that are welded on the radiator. It looks like those bosses are present on that link.
In fat, I think it looks pretty promising from a fitment standpoint.
It looks to me that all the mounting requirements for the fan are on that aluminum radiator. On my bike the fan bracket screws into bosses that are welded on the radiator. It looks like those bosses are present on that link.
In fat, I think it looks pretty promising from a fitment standpoint.
2012 Golf TDI, fast and frugal oil burner
1980 CX500C, All around road warrior (Sold)
1975 TS125 (Sold), old smoker
1977 naked GL1000, Highway cruiser
'81 GL1100 14,000 (reconditioned and sold)
'81 GL1100 50,000 miles (under construction)
2X 1981 CM400 beginner bike (sold)
1980 CB750C (sold)
1994 Virago 750 (Wifey's bike)
'76 GL1000 Sulphur Yellow (Megasquirted efi build) http://www.ngwclub.com/forum/viewtopic.php?f=47&t=59774
1980 CX500C, All around road warrior (Sold)
1975 TS125 (Sold), old smoker
1977 naked GL1000, Highway cruiser
'81 GL1100 14,000 (reconditioned and sold)
'81 GL1100 50,000 miles (under construction)
2X 1981 CM400 beginner bike (sold)
1980 CB750C (sold)
1994 Virago 750 (Wifey's bike)
'76 GL1000 Sulphur Yellow (Megasquirted efi build) http://www.ngwclub.com/forum/viewtopic.php?f=47&t=59774
- Old Fogey
- Honored Life Member
- Posts: 7702
- Joined: Mon Aug 27, 2007 11:31 pm
- Location: Glasgow, Scotland
- Contact:
Re: Aluminum Radiator?
That's strange. Some months back I saw this; someone on a forum had bought one and was singing it's praises. This week I was looking for the info on that and couldn't find it amongst my hundreds of saved items. I can't even remember which forum it was; possibly ClassicGoldWings, but I searched that and came up with nothing. Good shout.
Steve, you are right. The outlet is pointing in the wrong direction. I don't thnk that is a major problem as it's just a flexy bit of pipe attaching to it.
Interesting description. I'm wondering how they 'furnace braze' aluminium? That's a new one to me.
Steve, you are right. The outlet is pointing in the wrong direction. I don't thnk that is a major problem as it's just a flexy bit of pipe attaching to it.
Interesting description. I'm wondering how they 'furnace braze' aluminium? That's a new one to me.
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
- 5speed
- Honored Life Member
- Posts: 5312
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: Aluminum Radiator?
disregard. I was looking at the rad hose outlet..not the one for the over flow hose..
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- lostboy
- Cast Iron Member
- Posts: 66
- Joined: Tue Sep 20, 2016 10:28 am
Re: Aluminum Radiator?
I have also seen and wondered about these radiators. My copper one is still in good shape so I'll leave it. I have wondered about cooling fans more. A lot has changed since the 70s as far as electric motors go. They make way lower profile options for transmission and oil coolers that would probably work really well at a lesser draw.
1975 GL1000 (Basket Case
1982 GL1100 (Project)
1975 Cb550k
1977 Cb550k
2013 wr250r
2009 Honda Foreman 500 Rubicon
1968 Z50a
I also have two GL1100 parts bikes...
1982 GL1100 (Project)
1975 Cb550k
1977 Cb550k
2013 wr250r
2009 Honda Foreman 500 Rubicon
1968 Z50a
I also have two GL1100 parts bikes...
- ericheath
- Honored Life Member
- Posts: 9580
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Aluminum Radiator?
I'm thinking it was the turbo bike...
http://www.ngwclub.com/forum/search.php ... sf=msgonly
http://www.ngwclub.com/forum/search.php ... sf=msgonly
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- childintime65
- Brass Member
- Posts: 22
- Joined: Thu Jul 16, 2009 12:16 am
- Location: Ohio
Re: Aluminum Radiator?
I work for an auto supplier and we make radiators. They are indeed furnace brazed. Imagine a giant conveyor pizza oven that heats to 1000's degrees and cools down to room temp in 30 minuets.Old Fogey wrote:That's strange. Some months back I saw this; someone on a forum had bought one and was singing it's praises. This week I was looking for the info on that and couldn't find it amongst my hundreds of saved items. I can't even remember which forum it was; possibly ClassicGoldWings, but I searched that and came up with nothing. Good shout.
Steve, you are right. The outlet is pointing in the wrong direction. I don't thnk that is a major problem as it's just a flexy bit of pipe attaching to it.
Interesting description. I'm wondering how they 'furnace braze' aluminium? That's a new one to me.
1976 GL1000
1977 GL1000
1980 GL1100
1977 GL1000
1980 GL1100
- 5speed
- Honored Life Member
- Posts: 5312
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: Aluminum Radiator?
I need a new rad..mine was patched by a master booger welder...
Added the aluminum rad to my parts list..
Added the aluminum rad to my parts list..
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- Old Fogey
- Honored Life Member
- Posts: 7702
- Joined: Mon Aug 27, 2007 11:31 pm
- Location: Glasgow, Scotland
- Contact:
Re: Aluminum Radiator?
Eric, I think you may be right. The link in the post is long gone though.ericheath wrote:I'm thinking it was the turbo bike...
http://www.ngwclub.com/forum/search.php ... sf=msgonly
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
- Old Fogey
- Honored Life Member
- Posts: 7702
- Joined: Mon Aug 27, 2007 11:31 pm
- Location: Glasgow, Scotland
- Contact:
Re: Aluminum Radiator?
Just had another look at that ebay ad.
They use the same picture for both the 1000 and the 1100, although maybe that doesn't mean they supply the same one for either.
Checked out GPI racing too. They only list for the 1100, no 1000
http://www.ebay.com/itm/GPI-racing-ALUM ... 3d1e668dc2
They use the same picture for both the 1000 and the 1100, although maybe that doesn't mean they supply the same one for either.
Checked out GPI racing too. They only list for the 1100, no 1000
http://www.ebay.com/itm/GPI-racing-ALUM ... 3d1e668dc2
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
- ericheath
- Honored Life Member
- Posts: 9580
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Aluminum Radiator?
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- irishcarbomb
- Silver Member
- Posts: 605
- Joined: Fri Jan 04, 2013 6:58 pm
- Location: Humble, TX
Re: Aluminum Radiator?
yup, used it on the turbo build. still holding up well, if i remember right I had to get a little creative with the mounts but otherwise it fit great. I run water wetter and distilled water, fan only turns on when idling in 90* plus air temperatures.
Looking at datalogs, temps run in the 150-170 range mostly.
Looking at datalogs, temps run in the 150-170 range mostly.
1983 GL1100 Fuel Injected Turbo Build Thread
- hoganJr
- Gold Member
- Posts: 1093
- Joined: Mon Jun 25, 2007 9:18 am
- Location: Greenfield Indiana
Re: Aluminum Radiator?
The aluminum radiator is really good-looking! Have you considered polishing it and leaving as much as possible exposed?
HoganJr
HoganJr
1991 GL1500
-
- Similar Topics
- Replies
- Views
- Last post
-
- 47 Replies
- 1747 Views
-
Last post by 5speed
-
- 25 Replies
- 903 Views
-
Last post by wingrider
-
- 6 Replies
- 560 Views
-
Last post by heraldhamster
-
- 5 Replies
- 445 Views
-
Last post by ericheath