gl1100 muffler mounting question

Discuss everything about Honda GoldWing. Feel free to ask any question related to GoldWing.

Moderators: CYBORG, Oldewing, robin1731, Forum Moderators

Post Reply
User avatar
Jetubet
Titanium Member
Titanium Member
Posts: 302
Joined: Sun Jun 07, 2009 1:26 pm

gl1100 muffler mounting question

#1

Post by Jetubet »

I've lost the left side muffler mounting bolt on my bike. The bolt below the rear foot peg. The right side has a spacer between the muffler mounting flange and the mount the rear foot peg attaches to. I've looked at the online diagrams but neither side shows a spacer. Can someone look at theirs and let me know what I need to replace on the left side. I know at the very least it's going to be a nut and bolt. Thanks in advance. I also need a service manual PDF. The computer I had mine on crashed. Sheesh.
1983 Goldwing 1100 Standard
Candy Regal Brown
User avatar
Earl43P
Silver Member
Silver Member
Posts: 670
Joined: Fri Mar 02, 2012 8:10 pm
Location: Farmington, PA

Re: gl1100 muffler mounting question

#2

Post by Earl43P »

http://www.westernhonda.com/fiche_secti ... veh=132144

You mean #10 and 13?

NUT, FLANGE (10MM)
94050-10000

BOLT, FLANGE (10X35)
95701-10035-00 (replaces 95700-10035-00)

I can't look at mine to tell, I never ran the stock exhaust.
KTM390A “Hootinanny”
04 ST1300 DDDD (Double darksided daily driver) Sold 4/2022
93 GL1500I Double darksided and SOLD 3/29/20.
99 Valkyrie IS, Fast Black Double Darksided
"Fishtailed, flipped and flung me, but wearing it well". Sold!
82 GL1100 retired DD, needs work.... Sold 3/3/17
User avatar
RB
Honored Life Member
Honored Life Member
Posts: 4268
Joined: Sun Apr 29, 2007 7:26 am
Location: AZ

Re: gl1100 muffler mounting question

#3

Post by RB »

NO SPACER
98 1500 SE..
99 1500 SE SOLD
97 SE 1500 SOLD
83 SOLD
82 REBUILT sold!!!
81 DAILY RIDER sold her :(((!
81 REBUILT SOLD!!!
81 REBUILT SOLD!!
80 REBUILT SOLD
79 IN BASKET PARTS FOR SALE
79 CLEANED UP AND SOLD
78 REBUILT SOLD
77 REBUILT SOLD
76 SOLD/PARTIAL REBUILD
76 REBUILT AND SOLD
75 REBUILT SOLD
75 REBUILT SOLD
75 REBUILD SOLD


FAIR WINDS,
RB
User avatar
Jetubet
Titanium Member
Titanium Member
Posts: 302
Joined: Sun Jun 07, 2009 1:26 pm

Re: gl1100 muffler mounting question

#4

Post by Jetubet »

You're right, no spacer. What I thought was a spacer is part of the mount that is welded to the frame. Both sides have them. I didn't notice the one on the left because it's much smaller than the one on the right. Thanks for the replies.
1983 Goldwing 1100 Standard
Candy Regal Brown
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “GoldWing Tech Discussions”