rcmatt007 wrote:the rears will direct exchange
to change the fronts you must:
1: change the fork lowers
2: change the brake calipers (can use the actual brake cylinder)
3: change the speedo
4: change the rotors
My current project is a "77".
It needed wheels and I aquired Comstars front and rear.
The front wheel has the speedometer sending unit on the left.
For the front I also was able to find front forks (lowers) and calipers and rotors to fit.
As the speedometer sending unit (front axle) turns clockwise, same as my "76" (which is on the right) I did not think I needed to look for another Speedometer.
Do I need a speedometer (item #3)?
Or does item #3 refer to the sending unit?
1974 Honda XL350
1975 Red GL1000 (gone from stable but still in the family)
1976 (original owner in 76) Sulpher Yellow GL1000
1977 Restored then Triked Sulpher Yellow GL1000
1976 (garage find completed 2015) Sulpher Yellow GL1000
1978 Watsonian Monaco
1960 IH B414http://www.flickr.com/photos/76_gl1000_project