gl1100 muffler mounting question

[Jetubet]

I've lost the left side muffler mounting bolt on my bike. The bolt below the rear foot peg. The right side has a spacer between the muffler mounting flange and the mount the rear foot peg attaches to. I've looked at the online diagrams but neither side shows a spacer. Can someone look at theirs and let me know what I need to replace on the left side. I know at the very least it's going to be a nut and bolt. Thanks in advance. I also need a service manual PDF. The computer I had mine on crashed. Sheesh.

[Earl43P]

http://www.westernhonda.com/fiche_secti ... veh=132144

You mean #10 and 13?

NUT, FLANGE (10MM)
94050-10000

BOLT, FLANGE (10X35)
95701-10035-00 (replaces 95700-10035-00)

I can't look at mine to tell, I never ran the stock exhaust.

[RB]

NO SPACER

[Jetubet]

You're right, no spacer. What I thought was a spacer is part of the mount that is welded to the frame. Both sides have them. I didn't notice the one on the left because it's much smaller than the one on the right. Thanks for the replies.