Page 1 of 9

BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2016

Posted: Sun Nov 04, 2012 3:00 am
by sunnbobb
BB3.jpg


BRADSHAW BIKES POLISHING AND BIKE RESTORATION SERVICES

POLISHING SERVICE

CARB TOPS (set) $50
INTAKES (set) $40
TIMING BELT COVERS (pair) (any year) $57
GL1000 Valve covers (pair) $57
GL1100 Valve covers (pair) (Includes new painted emblems) $57
GL1200 Valve covers (pair) (Includes new painted emblems) $57
FRONT FORK LOWERS (pair) (75-82) $90
FRONT TRAC FORK LOWER (pair) (83-87) $95
OIL FILTER COVER $20
1200 FORK BRACE $25
POINTS COVER $15
FRONT WHEEL HUB $35
REAR WHEEL HUB $65
TRIPLE TREE $175
CLUTCH COVER $38
FINAL DRIVE $285
SHOCK MOUNT $15

POLISHED PARTS (WE SUPPLY THE PART)

GL1000/1100 Valve cover set $95 (except 83)
83 GL1100 Valve cover set $110 (No "made in Japan" on cover)
GL1000/1100 Timing Belt cover set $90
GL1000/1100 Intake Manifold set $85
Tach/fuel pump fitting $35
Points cover $25
Fork lowers $105
Thermostat Housing and pipe fittings $95
Water pump cover $25
Right side inspection plate $35
Oil sump cover $25
Oil filter cover $45
Clutch Cover $40
Final Drive $225
GL1000 right rear lower shock mount $25
Polished Fork Brace $165
"VYPER" handles set $85
TAROZZI FORK BRACE POLISHED $189

OTHER SERVICES

4 lbs of fasteners run through our tumbler $25 shipped
HIGH TEMP POWDER COAT HEADERS (1000 degree rated) Choice of black or silver $100

HYDRAULIC CLUTCH CONVERSION Kit $195

To order, pm or email Sunnbobb@gmail.com your part list. We will send you a paypal invoice with the amount due and the shipping address. In most cases we strive for less than 14 day turn around.


CATALOG

CARB TOPS (set) $45
bd carbs rebuilt finished.jpg


INTAKES (set) $38
polished parts - Intakes.jpg


TIMING BELT COVERS (pair) (any year) $59
1 polishing Timing belt covers.jpg


Polished GL1200 Timing Belt Covers.jpg


GL1000 Valve covers (pair) $50
gl1000 valve covers polished.jpg


GL1100 Valve covers (pair) (Includes new painted emblems) $55
gl1100 polished covers.jpg


GL1200 Valve covers (pair) (Includes new painted emblems) $55
gl1200 polished vavle cover small.jpg


FRONT FORK LOWERS (pair) (75-83) $75
POLISHED FORKS.jpg


POINTS COVER $15
FRONT WHEEL HUB $35
BD Front Hub 1 2.jpg


REAR WHEEL HUB $65
bd rear wheel.jpg


TRIPLE TREE $145
triple-tree.jpg


CLUTCH COVER $38
84 clutch cover polished.jpg


POLISHED PARTS (WE SUPPLY THE PART)

Tach/fuel pump fitting $35
polished fuel pump mount 1.jpg

POLISH FUEL.jpg


Points cover $15

Fork lowers $105
POLISHED FORKS.jpg


Thermostat Housing and pipe fittings $95
POLISH WATER PUMP.jpg


Water pump cover $25


Right side inspection plate $35
polish inspection plate.jpg


Oil sump cover $25
polish sump cover.jpg


Oil filter cover $35

Clutch Cover $40
84 clutch cover polished.jpg


Final Drive $225 (yours $185)
bd final polished.jpg


4 lbs of fasteners run through our tumbler $25 shipped
fasteners1 after.jpg


HIGH TEMP POWDER COAT HEADERS Choice of black or silver $105
headers.jpg


Turned Brake Disks $110 (set of 3)
Drilled $35 per rotor
polished disked.jpg

bd front wheel with brake 1.jpg


"VYPER" HANDLES $85 set
vyper.jpg


Tarozzi polished fork brace (GL1000 - GL1100) $189
terozzi.jpg


HYDRAULIC CLUTCH CONVERSION KIT $195
This is a kit for converting your cable driven clutch to a later style hydraulic clutch. Included in this kit:

1 refinished Clutch Cover w/ new Honda OEM seal painted either aluminum or black - polished add $20
1 Rebuilt Hydraulic Slave Cylinder new seals, spring etc.
1 New 48" Stainless Steel AN3 line
1 New Male to Male AN3/10mm connector
1 New Clutch Cover Gasket
1 New Custom made Stainless Steel push rod

This kit is ready to hookup to a Hydraulic Master Cylinder. Simply remove the old clutch and install this one and install the master of your choosing. You will also need a 10mm x 3AN banjo adapter with the angle of your choice, and a 10mm banjo bolt if you are using the gl1200 master cylinder. T All parts have been professionally reconditioned and rebuilt to like new specification.



Image

GOLDWING ART PRINTS

8x10 $15
8x10 matted $20
Price includes delivery

gwret1copy.jpg

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Nov 04, 2012 9:21 am
by gregforesi
I don't know about the rest of the parts, but I do know that's a good deal on a final drive.

I had an "amateur polishing moment" yesterday involving a flying carb top. As a result I'm thinking of installing a padded cell for polishing. I just gotta figure out how to hold the parts when I've got the belted white jacket on.

Inside my padded room no one will hear me crying.

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Nov 04, 2012 9:24 am
by AODRN
I'm sold. Where do I send my stuff?

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Nov 04, 2012 9:26 am
by Pony Ruiz
Wow

nice stuff.

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Nov 04, 2012 11:28 am
by Roady
Now there's a catalog I could browse through for the entire winter.

Blingage!

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Nov 04, 2012 11:46 am
by sunnbobb
I thought it was about time I pulled everything into one post. :)

I forgot to mention ordering info. Added to the first post.

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Tue Nov 13, 2012 5:50 pm
by Gowing
Those parts look fantastic,
How do, for instance, the fork legs and valve covers wear?
That is polished aluminum right?
It looks like chrome. Do they slowly paternal and corrode?
Thanks dave

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Tue Nov 13, 2012 6:36 pm
by Roady
I'm hoping you meant patina. Paternal is something my father did ... ;)

Bradshaw did my parts and all I've had to do is rub them down every other month with aluminum polish. Still look like sterling silver.

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Tue Nov 13, 2012 8:25 pm
by sunnbobb
Nothing like a testimonial.. thanks Roady!

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Mon Nov 19, 2012 4:24 pm
by sunnbobb
And another happy customer! Thanks Dritzman!

After:

polished gl1000 set.jpg


polished gl1000 forks.jpg



Before:
polish before 1.jpg


polish before 2.jpg


polish before 3.jpg

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sat Dec 15, 2012 2:25 am
by sunnbobb
Shameless bump

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sat Dec 15, 2012 6:34 pm
by turboter
Sunnbobb,
Looks like great work!
Just wondering if you have ever thought of expanding,like polishing early honda cb 750 engine parts?

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Dec 16, 2012 2:08 am
by sunnbobb
turbo, I frequently do parts for other bikes, but have not, as yet, cataloged them.

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Dec 16, 2012 12:47 pm
by northwood
After polishing, do you clearcoat the parts? To keep them looking good?

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Dec 16, 2012 12:51 pm
by sunnbobb
NW, we do not. There is controversy regarding the practice. I fear that clear coat would trap moisture underneath and make it hard to keep them looking nice. I have found just a wipe of metal polish once in a while will keep them looking bright. I have wanted to try a crystal clear power coat though...