cx drive shaft

for those of you that have M.B.S. (multiple bike syndrome) and have the "silver wing" models.
as our sponsors also have supplies for those bikes and they are popular with the "wing" crowd.

Moderators: CYBORG, Oldewing, robin1731, Forum Moderators

Post Reply
User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

Re: cx drive shaft

#16

Post by duke182 »

Very nice bike.
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
dbanta
Rusty Probie
Rusty Probie
Posts: 2
Joined: Wed Aug 16, 2017 6:08 pm

Re: cx drive shaft

#17

Post by dbanta »

who was the guy you sent this off to get modified? would you share?
puffy75 wrote:IMG_1952.JPG

Ok I know it has been awhile but it had a long way to go back and forth. The modified piece is below the left over pieces above from the two shafts. The longer forward portion is from the CX500 and the longer rear portion is from the GL500. Needed to fit the GL Pro Link rear swing arm to the CX along with other mods. IE: The pivot bearings are a different size and need modification, the mount for the single shock (I decided on duals) and the mounts for lower Pro Arm link. Still has to be road tested :roll:
User avatar
Sagebrush
Run Executive
Run Executive
Posts: 6465
Joined: Wed Aug 15, 2007 10:35 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/album269/
Location: Raleigh, NC

Re: cx drive shaft

#18

Post by Sagebrush »

This is a pretty old thread and you may not get an answer as I haven't seen puffy75 post on this board for a long time.
Dean Spalding
Raleigh, NC

"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." - Albert Einstein

'82 Yellow GL1100
'81 Blue GL1100

My Gallery
My 1100 Build Thread
dbanta
Rusty Probie
Rusty Probie
Posts: 2
Joined: Wed Aug 16, 2017 6:08 pm

Re: cx drive shaft

#19

Post by dbanta »

Hey thanks for letting me know he hasn't been around. I will try reaching him by e-mail. Here is what I am working on. Trying to get the drive shaft made. Swing arm in the back with a bearing supported shaft between the motor and the swing arm.
$_3.JPG
$_3.JPG (54.87 KiB) Viewed 643 times
User avatar
scootsx2
True Blue Steel Biker
True Blue Steel Biker
Posts: 2485
Joined: Mon Jun 07, 2010 12:52 pm
Location: St. Louis, Missouri USA

Re: cx drive shaft

#20

Post by scootsx2 »

dbanta wrote:Hey thanks for letting me know he hasn't been around. I will try reaching him by e-mail. Here is what I am working on. Trying to get the drive shaft made. Swing arm in the back with a bearing supported shaft between the motor and the swing arm.
Nice project. You might also try over on the CX500 forum.
1975 GL1000 Sidecar Outfit
1982 CX500-based Trident ex-Police Trike
2001 GL1800 MotorTrike
2006 Vespa LX150
1956 Francis-Barnett Falcon 74
195x Solex 1700
196x Solex 2200

St. Louis, MO

The dude abides.

Brothers of the Third Wheel - Gateway Chapter http://www.btw-trikers.org
Vintage Japanese Motorcycle Club http://www.vjmc.org
Francis-Barnett Owners Club http://www.francis-barnett.co.uk/
Antique Motorcycle Club of America http://www.antiquemotorcycle.org/
Vintage Motor Cycle Club http://www.vmcc.net
British Motorcycle Charitable Trust http://www.bmct.org/
VeloSolex Club UK http://www.velosolexclubuk.com/
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “GL 500,GL650, CX500, CX650 forum”