Dear gurus
I live in South Africa and am in the process of assembling a 1978 Goldwing 1000 GL engine, but have lost the above mentioned part. It seems the cheapest would be to make one. Can somebody direct me to where I would be able to find the dimensions for this part
Kind regards
Primary chain oil feed nozzle
Moderators: Whiskerfish, ascot, Forum Moderators
-
- Brass Member
- Posts: 21
- Joined: Sat Feb 05, 2011 4:04 am
- Location: South Africa
- Whiskerfish
- President
- Posts: 36850
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Primary chain oil feed nozzle
I don't believe you will find a source like that. Honda is well known for keeping their drawings and such tightly controlled.
Are you talking about # 9 here: http://www.cmsnl.com/honda-gl1000-goldw ... ml#results
Are you talking about # 9 here: http://www.cmsnl.com/honda-gl1000-goldw ... ml#results
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 9 Replies
- 361 Views
-
Last post by JBz
-
- 1 Replies
- 187 Views
-
Last post by 5speed
-
- 13 Replies
- 526 Views
-
Last post by Mike-C
-
- 6 Replies
- 659 Views
-
Last post by Recycled Roadkill